Key Process Control Process of PET Plastic Bottle

2022/04/19

Author: mgg-Plastic bottle manufacturer

(1) Dry and preheating of PET raw materials: The drying temperature is about 170 ° C, drying time 4h ~ 5h, otherwise affecting the ability and transparency. (2) Injection molding (cartridge temperature, injection pressure) - The temperature of the barrel is about 280 ° C, it is not easy to exceed 285 ° C, otherwise it is easy to produce acetaldehyde, maintaining pressure at 0.4 to 0.5 MPa, preparation highlights Transparency; the bottle cooling should be fast, otherwise it will affect transparency. (3) Bottle blank temperature regulation: temperature requirements 95 ° C, the orientation temperature is too low, the bottle stress is white, and the temperature is too high.

(4) Tensile blow molding: suitable mold, control stretching ratio, control blowing amount, pressure time, and exhaust gas before opening.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat
Now

Send your inquiry

Choose a different language
العربية
Deutsch
English
Español
français
简体中文
Current language:English